Matrix Multimedia E-Block System

EMP-300 Programmers

Previous Page | Next Page

HOME

USEFUL LINKS

MATRIX MULTIMEDIA | E-Block™ System

The E-Block™ System consists of small circuit boards each of which contains electronics that you would typically find in an Electronic System. The E-Blocks™ range consists of around 150 separate items which can be combined to make a variety of systems offering a wide range of learning opportunities. Select a Programmer Board, add a number of peripheral boards, combine with a range of software utilities including "Flow Code" to develop a fully functional electronic system.

PROGRAMMING BOARDS:	PICMicro Development Board Ver. 3		PICMicro Multiprogrammer
PERIPHERAL BOARDS:	LED Board	LCD Board	Switch Board	Prototype Board
	Sensor Board	Bluetooth Board	Internet Board	Voice CODEC Board
	Motors Board	Opto-Isolator Board	Keypad Board

PROGRAMMING BOARDS

PICMicro Development Board Ver. 3

Matrix Multimedia PICMicro Development Board
See larger view

To Top

01HP488   $285.00

This is an ideal platform for learning how PICmicros are programmed and also for project work. This board programs a range of 8, 14, 18, 28 and 40 pin devices from the 12, 16 and 18 series PIC micro ranges. The on-board LED's, switches and displays can be used in CD ROM based courses or with Microchip's MPLAB software. The board also has two E-Blocks parts (on ports C and D) which makes it compatible with a large range of E-blocks add-ons and sensors.

FEATURES:

USB Connector
Single bit audio output
2 line LCD display

Onboard sensors
Quad 7 segment display

PICMicro Multiprogrammer

See larger view

01EB006  115.00

This programmer connects to your PC via USB to provide you with a low cost and flexible PIC microcontroller programmer. This board can be used with Assembly, C or Flowcode programming utilities provided by Matrix Multimedia. This board will programm most 8, 14, 18, 28 and 40 pin flash PIC micro devices using the flexible programming software provided and provided "clean" access to all I/O lines. The board has 5 E-blocks parts to which you can connect a variety of peripheral boards.


PERIPHERAL BOARDS
LED Board
See larger view To Top		01EB004 $22.00
	It has 8 LEDs which shows the status of each bit on the port


LCD Board
See larger view To Top		01EB005 32.00
	This E-block contains a 16 character 2 line alphanumeric LCD display on a 5 wire serial bus.


Switch Board
		01EB007 22.00
To Top	This E-block contains 8 push-to-make switches.Connectors allow this board to be used in bus configuration.


Prototype Board
See larger view To Top		01EB016 32.00
	It contains a small breadboard for developing circuits and projects.Connectors for two E-block ports allow prototype wires and leads to be connected to the rows and columns on the prototype board.


Sensor Board
See larger view To Top		01EB003 26.00
	This board contains a variable resistor and a simple light sensor which can be used for simple analog experiments. It also contains sockets which allow users to interface with many other sensors.


Bluetooth Board
		01EB024 210.00
To Top	This board allows you to add Bluetooth capability to any microcontroller with UART functionality. Delivery: 2 to 3 Weeks


Internet Board
		01EB023 120.00
To Top	This board adds Ethernet functionality to a microprocessor with the need for developing a TCP-IP software stack. Delivery: 2 to 3 Weeks


Voice CODEC Board
See larger view To Top		01EB032 210.00
	This audio coder-decoder board allows students to investigate Bluetooth systems that use audio. It is based on MC145483 linear 13 bit CODEC which allows voice digitization and reconstruction as well as pre and post filtering. Delivery: 2 to 3 Weeks


Motors Board
To Top		01EB022 95.00
	This board is based on L298 device which can drive two motors operating up to 46 V @ 4A each. It can be used in a variety of motor control configurations including PID control. Delivery: 2 to 3 Weeks


Opto-Isolator Board
See larger view To Top		01EB035 54.00
	This Opto-Isolator Board allows you to add 4 separate optically isolated inputs to your E-blocks system. This is ideal for developing industrial control systems like PLCs (programmable Logic Controllers) where electrical systems need to be isolated from one another. Delivery: 2 to 3 Weeks


Keypad Board
		01EB014 26.00
	A simple 4 x 3 keyboard that allows data entry into bus based systems.
To Top

OTHER WAYS TO ORDER: ($10 minimum order + shipping)
1. Email, Fax (1-732-381-1006; 1-732-381-1572) or
Telephone (1-800-972-2225 or in NJ 1-732-381-8020)
2. Mail to: Electronix Express, 900 Hart Street, Rahway, NJ 07065
For Complete Ordering Instructions, Please Refer to Our "How To Order" Page.

For your convenience, our Order Form in PDF (106kb) or MicroSoft Word (36kb)
Format can be used - To be able to print the PDF version,
download your free copy of Acrobat Reader software from the Adobe site.

Subscribe to the Electronix Express Newsletter
(Filled with the latest news and information about the electronics industry.
This Newsletter may also contain special discounts not available anywhere else).
We may also send you email specials.

Email:
electron@elexp.com - General Questions and Comments
technical@elexp.com - Technical Questions